Crawler type shot blasting machine adopts cantilever type centrifugal sand blasting machine, with large projection angle, high efficiency and no dead angle. Long service life and simple structure; The wear-resistant rubber track reduces the collision and damage to the workpiece, and reduces the noise of the machine; The rail shot blasting machine adopts DMC pulse backwash bag filter, and the dust emission concentration is lower than the national regulations. This standard greatly improves the working environment of operators.
The working principle of the crawler type shot blasting machine is relatively simple, but there are also many noteworthy points. After adding the specified number of workpieces in the cleaning chamber, close the door, start the machine, drive the workpieces through the roller, start to rotate, and then throw out the sandblasting machine at high speed.
The projectiles form a fan-shaped beam and evenly strike the workpiece surface for cleaning. The thrown projectiles and sand particles flow from the small holes on the track to the screw conveyor at the bottom, and are sent to the elevator through the screw conveyor. The hopper is separated into the separator for separation.
The dusty gas is sucked into the dust collector through the fan, filtered into clean air and discharged into the atmosphere. The dust of the crawler type shot blasting machine is blown back to the dust collecting box at the bottom of the dust collector through air, and users can remove it regularly.
